Maybe i just don't understand the program well enough.
也许我只是不理解程序不够好。
I am open to such daggars being thrown.
我被抛出daggars。
Sometimes i have to deal with some pretty tight stairways...and sometimes i have to do scissor stairs...and quite frankly, I haven't found REVIT to be too good with the trial and error this process can sometimes involve.
Maybe I'm wrong. Maybe i'll learn some new tricks at AU this year. But for the time being, I need a solution, i know a thing or two about making useful families.
So i made this stupid 2D stair design tool (download links at the bottom of this post).
所以我做了这个愚蠢的2D楼梯设计工具（在这篇文章底部的下载链接）。
Its driven by the height of the stair and the number of steps to determine riser height. There is also a thick red line to show head clearance. Once i have the whole thing laid out properly, inserting the REVIT Stair objects is a snap by using the ALIGN tool.
其驱动楼梯的高度和步数来确定冒口高度。还有一个厚厚的红线显示头间隙。一旦我有了正确奠定了整个事情，插入的Revit楼梯对象是一个单元，使用“对齐”工具。
First i make the individual STEP unit
首先，我让各个步骤单位
These are the parameters for the STEP unit. I used shared parameters for everything. Even though the Height Clearance parameter has nothing to with this family, I pull the information back to this object so the tag works properly.
这些都为步进单位的参数。我都用共享参数。即使高度间隙参数与这个家庭毫无关系，我拉的信息返回这个对象，使标签正常工作。
Then i put all these together into a flight. There are some conditional On/Off parameters, the logic of which will be discussed in the FUZZY MATH course at AU this year.
然后我把所有这些汇集成一个飞行。有一些有条件的开/关参数，逻辑将讨论非盟今年在模糊数学课程。
These are the parameters for the flight. Its all pretty basic really.
这些飞行参数。所有真的非常基本。
Then i bring it into a project and BANG, i can monkey around with a stair pretty quick and easy.
然后我把一个项目和Bang，我可以与一个非常迅速，方便的楼梯周围猴子。
BTW, I did this in 2010 and boy did that suck. I really gotta a get an update to 2011 on my PC....Just waiting for the realease that runs native on a MAC and then i'll replace the whole kit and kaboodle...i hope i ain't gotta wait too long....
顺便说一句，我在2010年和男孩没有，吸。我真的要走一个得到我的电脑上更新至2011年....只等待realease在Mac上运行本机，然后我将更换整个套件和kaboodle......我希望我是不是得等待太长....
Here is the family in a project. If you are reading this, you already know how to get the family out there and into your library. Enjoy!
这里是家庭中的一个项目。如果你正在读这篇文章，你已经知道如何走出去，到你的库的家庭。享受！
发表于 2011-12-18 00:02:46
学习，学习，好教程多在国外，楼主怎么翻出去的？
发表于 2011-12-19 22:34:26
楼主
